Note for HHXG Chain electric hoist

Note for HHXG Chain electric hoist

1,In  HHXG Chain electric hoist HHXG iron and Chain electric hoist rigging before use. To be clear on the sign up with work load and range. It is strictly prohibited to use overload, and the HHXG Chain electric hoist often do visual inspection line with rear can use.

2, in normal use cases, the hoisting angle is a key color ring load. Lift angle between maximum allowed to exceed 120 degrees. Otherwise it will cause the HHXG Chain electric hoist furniture local plant.

3Between the  HHXG Chain electric hoist, prohibited the use of non formal connectors.

4 HHXG Chain electric hoist, bearing rigging prohibited hook pieces directly hung on the crane hook or wound on the hook.

5, HHXG Chain electric hoist rigging surrounded by hanging shuttle corner Pei plus liner, to prevent the ring chain and suspended matter damage.

6, the temperature of HHXG Chain electric using the FT hoist has a certain color our rigging.

7, requirements and ^> hanging heavy on the same plumb line hanging point heavy machinery. The crane hook is in keep stable equilibrium state, prevent ascension produces sliding or overturning.

8, links between the prohibition of torsion, twisted, knotted, related department to link activities should be flexible.

9, lifting weights of ascending and descending, stop to slow and smooth. Note the hoisted matter gravity balance, avoid impact load. Not for a long time the weight fool hung on the hanging chain.

10, no suitable sling hook, lifting ear rings, creep bolt connections. Single limb and multi limb HHXG Chain electric hoist can use the bundled cable rigging knot method. If the lifting loose items (such as wood scum tube, etc.), can use HHXG Chain electric hoist around the weight around * object of a circle method.

11, HHXG Chain electric hoist rigging must be handled with care. It is strictly prohibited to beat, throw touch and drag and drop to the ground. To prevent from high altitude. In order to avoid falling into the chain public through deformation, surface and internal injury.

12, HHXG Chain electric hoist rigging after use should be do clean and corresponding detection. No abnormalities should be placed in a special bracket. Shall not be placed on the ground. All the hanger storage to clean after drying coated anti rust oil. Storage locations to ventilation, dry, non corrosive gas.